CGSULIT SC880 Automotive OBD2 Diagnostic Scanner For Full System with 25+ Reset Service for Maintenance

CGSULIT SC880 Diagnostic Scanner Highlights

-Strong Compatibility: Covers 98% of vehicles from different manufacturers.(1996-2023).

-Deep System Diagnosis: Go beyond check engine lights. Diagnose problems of Engine, Transmission, ABS, SRS, Injectors, and more.

-25+ Reset Services: Perform essential resets like Crankshaft Sensor, Transmission Adaptation, Injectors, Airbag, Bleeding ABS Brake and more.

-Full OBD Modes: Supports all 10 OBD2 modes for vehicles compatible with OBD/EOBD/OBD2 standards.

-Lifetime Tech Free Update: No extra cost for software update (Way to update SC880)

-Smart Auto VIN: Save time - the SC880 automatically retrieves your vehicle's VIN for faster diagnosis.

-Live Data: Monitor key engine parameters in real-time for precise problem identification, such as RPM, oil temp, transmission temp, etc.

ABS/SRS: When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.

Oil Service Light Reset: This function is required when you are alerted that your vehicle is due for a service. It allows you to perform reset for a new calculation of the Engine Oil Life system once changed the oil.

EPB: This function is required for the maintenance of electronic braking system's safety and efficiency.

BRT: Battery Reset. The function lets you validate new batteries, clear faults from the dashboard and display current battery details of the vehicle such as Audi, BMW, Citroen, Peugeot, Seat, Skoda, Volvo, VW and Ford.

TBA/TPS: also called TBA, throttle body alignment. Using the throttle position sensors in the throttle body, the ECU learns the full open and full closed positions through various states (idle, part throttle, WOT) known as a Throttle Body Alignment (TBA)

SAS: helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

TPMS: Tire Pressure Monitoring System Programming The service allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS programming and reset after tires and/or TPM sensors are replaced and/or tires are rotated.

Injector Coding: Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity.

Prime Fuel Pump: During fuel system service, for example changing a fuel filter or when the system is opened, air is introduced into the system. This can cause hard to start issues. The Fuel pump prime command allows to pump to be run to bleed the system.

CVT: Continuous Variable Transmission, this function is used to reset the compensation code and initialize the ECT after a solenoid valve or valve body assembly has been replaced.

GEAR Learning: The crankshaft position sensor learns crankshaft tooth machining tolerance and save to the computer to more accurately diagnose engine misfires. After the engine ECU, crankshaft position sensor, or crankshaft flywheel is replaced, or the DTC 'tooth not learned' is present, tooth learning must be performed.

A/F Adjust: command allows the ECU to relearn these values to meet the Ideal air-fuel ratios after service, to ensure best engine performance.

DPF: This function especially works for the Diesel Particulate Filter system with DPF regeneration, letting you perform the D-P-F cleaning to clear the blockage through continuous burning of the particulates captured in the D-P-F filter. When a D-P-F regeneration cycle is completed, the DPF light automatically goes off. 

Seat Match: A memory seat is essentially an electrically-adjustable car seat which can be moved into pre-set positions at the push of a button. As a result of the removal of the DCC fuse, the "driving position memory" function of the driver and passenger side seat will be inoperative due to the loss of seat.

Clutch adaptation: Importance of clutch pedal correct -play. Anything less than the correct amount of correct play (or clearance) will result in clutch slip, because the pressure plate will be unable to exert its full pressure on the friction plate, clutch linkage adjustment to compensate for clutch wear.

11+ Languages Supported:

11 languages supported to meet the needs of customers in various countries:

English, Spanish, Russian, French, Japanese, German, Italian, Portuguese, Polish, Greek, Korean, 

Lifetime Free Update & 1 Year Warranty:

CGSULIT SC880 auto scanner is lifetime free update which ensure you always get the latest car software to improve its capability and coverage continuously.